AC220V Digital display intelligent RF remote control switch +5*receiver/ projection screen/Tubular motor garage door / shutters |

AC220V Digital display intelligent RF remote control switch +5*receiver/ projection screen/Tubular motor garage door / shutters |

Remote elevator controller is a very widely used wireless control device, can be used in garage door control and projection screen control, remote control curtain, white wall machine, and other fields, has the advantages of convenient installation using a simple safe and reliable.

Second, the system composition:
1, three key remote control (function is: the rise - stop - down)

2, remote elevator controller

Three, the main technical indicators:
1, the working frequency:  433 MHZ
2, the remote control operating voltage: 12 v27a (battery)
3, the controller working voltage: AC 220 v
4, controllers, rated power: 1000 w

Four, learning to code:

Hold down the key learning two seconds, lights out, press any key, remote control lights flashing, learning success.

Five, the method of use:
1, pay attention to choosing the right working voltage, otherwise there will be even life-threatening may damage the device.

2,Load power cannot exceed contact capacity, correct approach should be less than 70% of contact capacity.

New  production of digital multi-frequency 3-key wireless remote control using digital display technology, can be used as a number of remote control Use, a total of 20 remote control can switch (default)

Remote elevator controller is a very widely used wireless control device, can be used in garage door control and projection screen control, remote control curtain, and other fields, has the advantages of convenient installation using a simple safe and reliable.

System composition:

1  three key remote control (function :  up - stop - down)

2  remote elevator controller

Main technical indicators:

1   working frequency: 433MHZ

2  transmitter operating voltage: 12 v23a (battery)

3 receiver working voltage: AC 220 v

4  rated power: 1000 w

Method of code:

Hold  the key learning two seconds, lights out, press any key, remote control lights flashing, learning success.

Note

1  pay attention to choosing the right working voltage, otherwise  may damage the device even life-threatening

2  load power contact capacity, correctly approach should be less than 70% of contact capacity.

3 If found remote distance changes to be  shorter, please replace the remote control( battery 12 v 23A)

4 When installation, please disconnect the input power!!!!!!

Package Includes:
1x  Transmitter
5x  Receiver